WANRONG METALEnquire
MENU

STAINLESS STEEL MATERIALS

Stainless Steel Sheets & Plates

Stainless steel sheet and plate for cut parts, formed panels and fabricated assemblies. Combine the material dimensions with cutting, surface finishing and protection requirements for your drawing.

Protective-film covered stainless steel sheets stacked on a wooden pallet, with fine layered edges visible

PRODUCT RANGE

Sizes, Grades & Finishes

Compare the sizes, grades and finishes below for your product. If you need a different size or have not chosen a grade, send the drawing or requirements you have. Specific combinations are confirmed for your order.

Sheets & Plates

Thickness 0.30–16+ mm; above 16 mm by order confirmation.

Widths: 1000, 1219, 1500, 1524, 1800, 2000 mm. Lengths: 2000, 2438, 2500, 3000, 3048, 4000, 6000 mm.

Delivery: Cold-rolled · Hot-rolled

Grade Options
201-series202301302304304L304LN305309309S310310S316316L316Ti317L321330347409409L410430439440C441444904L22052304250717-4PH17-7PH
Surface Options
2D, 2B, BA, No.1 / HRAP, Decorative textures and patterns, Colour treatment, Anti-fingerprint topcoat, Transport protection film
View Grades & Finishes by Product Type

Use these details to compare the grade and finish options for each product type. Your enquiry can include sizes or processing requirements beyond the listed ranges.

Sheets & Plates

Grades
201-series202301302304304L304LN305309309S310310S316316L316Ti317L321330347409409L410430439440C441444904L22052304250717-4PH17-7PH
Finishes and processing
2D, 2B, BA, No.1 / HRAP, Decorative textures and patterns, Colour treatment, Anti-fingerprint topcoat, Transport protection film
Order details
Share the grade, thickness, width, length, quantity and rolling condition for the flat material you need. A part drawing can also show flatness, cutting, edges and downstream processing requirements.
Explore Surface Options

Loading your request…

Detailed Product SpecificationsOptional — add the specifications you have

Select Product Options

Choose the form and grade, or select Need advice. Dimensions and quantity complete your specification; surface, tolerance, packing and performance requirements are optional.

Material Grade
Dimensions
Quantity

You may enter an estimated quantity. Note this under Additional Requirements.

Quantity unitRequired
Surface and Delivery
Delivery conditionOptional
Surface, Edge and Packaging RequirementsOptional — add requirements if needed
Surface, Edge and Packaging RequirementsCompare Surface Solutions
Base surface finishOptional
Decorative texture or patternOptional
Colour treatmentOptional
Additional RequirementsOptional — add requirements if needed
Additional Requirements

Describe the final processing condition and the magnetic inspection requirements for your request.

About Non-Magnetic Requirements

YOUR ENQUIRY

Product Added

Stainless Steel Sheets & Plates

Review your selected products and add your contact details, or continue choosing products.

Complete Your EnquiryContinue Selecting Products

Alternative partner processing routes

Sheet and Plate Processing

Sheets can be levelled and cut from coil, while plate stock can be selected and cut to your drawing. The grade, dimensions, delivery condition and finished-part requirements determine the route.

PACKING AND ORDER COORDINATION

Packing, Quality & Delivery for Your Order

Material selection, surface protection and delivery need to work together. We review these requirements with your specification so they can be included in the quotation and order.

Packaging and Handling

Sheet separation, removable film, edge protection and the pallet or crate arrangement are considered alongside your surface finish and stack size.

Surface Protection & Packing

Specification and Quality Review

We review the grade, dimensions, tolerances and finish against your drawing or sample reference. Any required tests, inspection records and material documents are included in the order discussion.

Sampling & Quality Control

Identification and Delivery

We coordinate the agreed material and processing requirements with identification, packing-list information and delivery arrangements. Share the destination and any shipping or document requirements your project needs.

PURCHASING DETAILS

Tell Us About the Material You Need

Send the flat size you need or attach the part drawing. A surface sample or appearance reference is useful for visible components.

  1. Grade, thickness, width and length in millimetres.

  2. Cutting, flatness, edge and dimensional tolerance requirements.

  3. Surface or sample reference, quantity, protection and delivery destination.

Explore Surface Solutions

Explore texture, colour, functional topcoats and protection options for the product form you need.

PURCHASING QUESTIONS

Your Product & Ordering Questions

What information helps you quote sheets and plates?

Share the grade if known, thickness, full width × length and quantity, or attach your cutting drawing. Include any rolling condition, surface, flatness, edge and tolerance requirements. We work from the actual dimensions and delivery requirements of your part.

Can I combine a decorative surface, colour and protection?

Yes. Send an appearance sample or reference and describe the base finish, decorative treatment, colour, anti-fingerprint topcoat and removable protection you need. Keeping these requirements separate helps define the finished surface and sample for your order.

Can I request a size that is not listed?

Yes. Send the required dimensions or a drawing, along with the grade, quantity and processing needs. We can review the material and cutting options for that specification with you.

How can I specify packaging for visible surfaces?

Include any protective film, sheet separators, edge protection, stack size and pallet or crate requirements. The delivery destination and handling method help us review the packaging with your material order.

General Purchasing FAQ